About Us Worldwide Service Contact Us
Diesel Engine
For Industry
Diesel Engine
For Vehicle
Diesel Engine
For Marine
Diesel Engine
For Agriculture
Diesel Engine
For Genset
Used Engine
FD POWER Generating Sets
EQB180-20 Power Curve
General EQB180-20-Power-Curve
Displacement 5.9L
Bore 102mm
Cylinders 6
Stroke 120mm
Fuel System BOSCH Pump
Technical Specification
Aspiration Turbocharged
& Aftercooled
Certification Euro II
Weight Dry(with flywheel and alternator, but less starter and air compressor) 413kg
Weight Wet 437kg
Center Of Gravity Distance From Front End Of Cylinder Body 338mm
Center Of Gravity Distance Above Crank Centre Line 155mm
Maximum Bending Moment At Behind End Of Cylinder Body 1356N.m
Thrust bearing load limit  
Maximum intermittent 3781N
Maximum continuous 1780N
Performance Data
Idle Speed 750±100r/min Engine Speed(r/min)
Maximum no load governed speed 2900r/min ╿Torque(N.m)
Maximum overspeed capability
(15 secs max)		 4200r/min ╿Power(kW)
╿BSFC(g/kW.h)
Maximum altitude for continuous operation 2000m EQB180-20-Drawing
Clutch engagement torque at 800r/min 350N.m
When using exhaust brakes  
Exhaust pressure,at 2720r/min,at turbocharger outlet,must not exceed 414kPa
Approximate engine retardation 112kW
Advertised Power 132kW@2500r/min
Peak Torque 610N.m@1500r/min

Share |
recommended screen resolution:800x600
copyright © fd power co.,ltd 2007~2013. All rights reserved
Disclaimer : FD POWER CO.,LTD is in no way affiliated with CUMMINS,DEUTZ,ISUZU,IVECO or PERKINS etc OEM manufacturers. All OEM manufacturers names, logos, part numbers, symbols, drawing, colors and descriptions are for reference purposes only and it is not implied that any part used is the product of these manufacturers.