About Us Worldwide Service Contact Us
Diesel Engine
For Industry
Diesel Engine
For Vehicle
Diesel Engine
For Marine
Diesel Engine
For Agriculture
Diesel Engine
For Genset
Used Engine
FD POWER Generating Sets
L360-20
General Power Curve

L360-20-Power-Curve
Displacement 8.9L
Bore 114mm
Cylinders 6
Stroke 135mm
Fuel System BOSCH Pump
Technical Specification
Aspiration Turbocharged
& Aftercooled
Certification Euro II
Weight Dry(with flywheel and alternator, but less starter and air compressor) 650kg
Weight Wet 680kg
Center Of Gravity Distance From Front End Of Cylinder Body 427mm
Center Of Gravity Distance Above Crank Centre Line 163mm
Maximum Bending Moment At Behind End Of Cylinder Body 1356N.m
Thrust bearing load limit  
Maximum intermittent 5338N
Maximum continuous 2670N
Performance Data
Idle Speed 700±100r/min Engine Speed(r/min)
Maximum no load governed speed 2500r/min ╿Torque(N.m)
Maximum overspeed capability
(15 secs max)		 3500r/min ╿Power(kW)
╿BSFC(g/kW.h)
Maximum altitude for continuous operation 2000m L360-20-Drawing
Clutch engagement torque at 800r/min 780N.m
When using exhaust brakes
Exhaust pressure,at 2720r/min,at turbocharger outlet,must not exceed 450kPa
Approximate engine retardation 114kW
Advertised Power 264kW@2200r/min
Peak Torque 1480N.m@1400r/min

Share |
recommended screen resolution:800x600
copyright © fd power co.,ltd 2007~2013. All rights reserved
Disclaimer : FD POWER CO.,LTD is in no way affiliated with CUMMINS,DEUTZ,ISUZU,IVECO or PERKINS etc OEM manufacturers. All OEM manufacturers names, logos, part numbers, symbols, drawing, colors and descriptions are for reference purposes only and it is not implied that any part used is the product of these manufacturers.